Temperature Measurement Solution
Mutiple people Body Temperature Screening System Single people Body Temperature Screening SystemThis article will introduce the process of save a video manually and saving it to the computer’s local disk.
The example in this article is using a Windows based computer.
On Foscam VMS:
Step 1: Establish a local directory for storage of manual recording files
1)Navigate to Settings → click Record → Storage Location to setup the Local Recording Location.
2)Click Browse → a window will open → choose a local storage path and click Save.
Step 2: Initiate a Manual Recording
1)Navigate to Live Video2)Click on the Record button to begin the recording file.
Step 3: Locate and open the recording file.
1)Open the Microsoft Explorer2)Navigate to the path (directory/folder) where the recording is stored.
1) Avoid using the system disk.
2) During recording the Settings tab is not accessible. Stop the recording to access the tab if needed.
On PC browser:
Step 1: Establish a local directory for storage of manual recording files
1)Navigate to Settings → click Record → Storage Location to setup the Local Recording Location.
2)Click Browse → a window will open → choose a local storage path and click Save.
Step 2: Initiate a Manual Recording
1)Navigate to Live Video
2)Click on the Record button to begin the recording file.
3)Click the Record button again to ens the recording.
Step 3: Locate and open the recording file.
1)Open the Microsoft Explorer
2)Navigate to the path (directory/folder) where the recording is stored.
Note: When it is not possible to setup the Local Recording Path follow these tips.
1) Avoid using the system disk.
2) If Internet Explorer is used add the IP address of the camera as a trusted site or run Internet Explorer as the Administrator.
3) During recording the Settings tab is not accessible. Stop the recording to access the tab if needed.
Was this article helpful?