Temperature Measurement Solution
Mutiple people Body Temperature Screening System Single people Body Temperature Screening SystemPre-parations:
•Power on base station, and connect it to router by Ethernet cable
•Insert battery to your camera
•And place camera within 1-3 feet away from base station
Use Sync you can add more cameras to the base station, or re-connect camera to base station.
Steps:
(1)Press Sync button on top of base station for 3 seconds, Sync light(next to power) will start to flash on base station.
(2)While the Sync light of base station is flashing, please press Sync button on top of camera for 3 seconds. You’ll hear camera voice “Sync activated” and see a green blinking light on camera.
(3)Wait for a minute for camera to be synced, and you’ll hear ”Base Station connection succeeded”. During the procedure camera will restart, and you will see camera indicator light turn off , it’ll be solid for 5 seconds when it’s connected successfully.
(4)Refresh in your Foscam app, and you’ll see the newly added camera.
Was this article helpful?
Contact information
Full name *
Email *
Telephone number
Camera model
Help Topic *
Ticket Details
Please describe your problem as detailed as possible so that we can assist you in the best possible way
Title *
Submit
