What is the normal status of a Foscam camera when it is operating normally and plugged into a network?
Overview: This article will introduce the normal light indicators when a Foscam camera is plugged into a network and operating normally. 1. Indoor Pan and Tilt cameras:
• During initial power-up the camera will pan and tilt automatically if configured to do so via the camera settings.
• The red power indicator will be turned on.
• The green network indicator will blink.
• The small green RJ-45 LED will turn on and the orange LED will blink after network initialization. 2. Indoor Fixed cameras:
• The red power indicator will be turned on.
• The green network LED will blink.
• The small green RJ-45 LED with turn on and the orange LED will blink after network initialization. 3. Outdoor Weather Resistant cameras:
• The small green RJ-45 LED will turn on and the orange LED blink after network initialization. 4. Outdoor Pan and Tilt cameras:
• During initial power-up the lens inside of the dome will pan and tilt automatically if programmed to do so via the camera settings.
• The small green RJ-45 LED will turn on and the orange LED will blink after network initialization.
